Technical specifications
MCR-5000 Series Digital LCR Meter

MCR test parameters: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ
Test frequency;
MCR-5010;
100Hz, 120Hz, 1kHz, 10kHz
MCR-5030;
100Hz, 120Hz, 1kHz, 10kHz，20kHz，30kHz
MCR-5100;
40Hz, 50Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 800Hz, 1kHz, 1.2kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 75kHz, 100kHz
MCR-5200;
40Hz, 50Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 800Hz, 1kHz, 1.2kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 75kHz, 100kHz, 120kHz, 150kHz, 200kHz
Basic measurement accuracy: 0.1% (MCR-5010: 0.15%)
Equivalent circuit: In series, parallel
Mathematics function: Absolute deviation, Percentage deviation
Range mode: AUTO, HOLD, Manual selection
Trigger mode: INT, EXT
Speed (≥1kHz):
FAST: less than 30 times per second,
MED : 10 times per second,
SLOW: 3 times per second.
Delay time: 0—6s, 1ms step
Calibration function: Quick Clear / SINGLE SHORT / SINGLE OPEN
Test terminal: Five terminals
Display mode: Direct display, Δ, Δ%, V/I
Monitor: 5 bit resolution, 4.3 inch LCD display
Output impedance: 30Ω ve 100Ω
Test signal level: 0.1V, 0.3V, 1V; Accuracy：5%
Interface:
Standard: RS232C, USB HOST, HANDLER (Except MCR5010),
Optional: USB DEVICE, headphone jack, Foot switch interface, GPIB

for more info please look the file section.