Technical specifications
MCR-5010 Digital LCR Meter

• MCR test parameters: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ
• Test frequency;
  100Hz, 120Hz, 1kHz, 10kHz
  
• Basic measurement accuracy: 0.1% (MCR-5010: 0.15%)
• Equivalent circuit: In series, parallel
• Mathematics function: Absolute deviation, Percentage deviation
• Range mode: AUTO, HOLD, Manual selection
• Trigger mode: INT, EXT
• Speed (≥1kHz):
  FAST: less than 30 times per second,
  MED : 10 times per second,
  SLOW: 3 times per second.
• Delay time: 0—6s, 1ms step
• Calibration function: Quick Clear / SINGLE SHORT / SINGLE OPEN
• Test terminal: Five terminals
• Display mode: Direct display, Δ, Δ%, V/I
• Monitor: 5 bit resolution, 4.3 inch LCD display
• Output impedance: 30Ω ve 100Ω
• Test signal level: 0.1V, 0.3V, 1V; Accuracy：5%
• Interface:
  Standard: RS232C, USB HOST, HANDLER (Except MCR5010),
  Optional: USB DEVICE, headphone jack, Foot switch interface, GPIB

for more info please look the file section.